Publication:
Analytical and numerical development on the indentation mechanism in a rotary hammer forging process

dc.contributor.affiliation#PLACEHOLDER_PARENT_METADATA_VALUE#en_US
dc.contributor.authorAlazemi, Saud F E M Den_US
dc.contributor.supervisorErry Yulian T. Adesta, Ph.Den_US
dc.date.accessioned2024-10-07T03:03:48Z
dc.date.available2024-10-07T03:03:48Z
dc.date.issued2020
dc.description.abstractRotary hammer forging process is getting popular since it has many advantages as compared to the conventional forging process. The mechanism of the movement in terms of orbital motion of the conical upper die becomes a primary concern of this thesis. This thesis presents the three stages of the modeling of the rotary hammer forging. The first stage is the development of the orbital motion of the conical upper die. Three dimensional CAD model of the conical upper die was developed to determine the orbital motion as a function of the four parameters: Nutation, Precession, Spin and Rocking-Die mechanism. A reasonably accurate design of the conical upper die and the workpiece has been developed based on the motion as a result of interaction of conical upper die and upper part of workpiece geometries. The behavior of orbital motion with any active combination of those four parameters was observed. The second stage was the development of the conical upper die with the specific feature in order to generate a product with an unsymmetrical shape of upper part of the product. The forming sequence and mechanism of the formation of the upper part of product were generated. The third stage was the analysis of the stress strain state during the formation of the upper part of the workpiece. An elastic-plastic, dynamic analysis of 3D rotary hammer forging mechanism with the concern at the workpiece and their interaction with a model of dies have been performed. Verification of the indentation mechanism of the rotary hammer forging had been done by validating the result with the existing experimental results.en_US
dc.description.abstractarabicأصبح التطريق الآلي للمثقاب الكهربائي "المطرقة الدورانية" شائعًا اليوم بسبب عدد من المزايا مقارنة بالتطريق التقليدي، ويهدف هذا البحث إلى دراسة آلية الحركة الدورانية للقاطع العلوي المخروطي، ويتناول المراحل الثلاث لعملية قولبة التطريق الآلي للمثقاب الكهربائي وتشكيله، فالمرحلة الأولى تصنيع الحركة الدورانية للقاطع العلوي المخروطي، وفيها صُنع أنموذج ثلاثي الأبعاد (بوساطة الحاسوب) للقاطع العلوي المخروطي لتحديد وظيفة الحركة الدورانية بناء على أربعة معاملات هي: الميلان، والبدارية، واللف المغزلي (التدويم)، وآلية اهتزاز القاطع، وصُنع تصميم دقيق للقاطع العلوي المخروطي بناء على الحركة الناتجة من التبادل بينه وبين الجزء العلوي للقطعة المصممة هندسيًّا، مع مراقبة الحركة الدورانية وفق المعاملات الأربعة السابقة، والمرحلة الثانية كانت تطوير القاطع العلوي المخروطي مع ميزة محددة لإنشاء منتج غير متماثل الشكل من الجزء العلوي للمنتج، وصُنعت بنية متسلسلة وآلية تشكيل لذلك الجزء، وفي المرحلة الثالثة كان تحليل الجهد في أثناء تكوين الجزء العلوي من القطعة المصنعة، وإجراء تحليل ديناميكي لمعامل المرونة ثلاثي الأبعاد لآلية طرق المثقاب الكهربائي مع الأخذ في الحسبان القطعة المصممة هندسيًّا وتناسبها مع قوالب القواطع، وفي النهاية كانت المرحلة الرابعة، وفيها التحقق من آلية التسنين (المسافة الفارغة) للمثقاب الكهربائي من خلال مقارنة نتائج هذا البحث. بنتاen_US
dc.description.identifierThesis : Analytical and numerical development on the indentation mechanism in a rotary hammer forging process /by Saud F E M D Alazemien_US
dc.description.identityt11100424545FEMDAlazemien_US
dc.description.kulliyahKulliyyah of Engineeringen_US
dc.description.notesThesis (Ph.D)--International Islamic University Malaysia, 2020.en_US
dc.description.physicaldescriptionxix, 122 leaves : illustrations ; 30cm.en_US
dc.description.programmeDoctor of Philosophy (Engineering)en_US
dc.identifier.urihttps://studentrepo.iium.edu.my/handle/123456789/3048
dc.language.isoenen_US
dc.publisherKuala Lumpur : Kulliyyah of Engineering, International Islamic University Malaysia, 2020en_US
dc.titleAnalytical and numerical development on the indentation mechanism in a rotary hammer forging processen_US
dc.typeDoctoral Thesisen_US
dspace.entity.typePublication

Files

Original bundle

Now showing 1 - 2 of 2
Loading...
Thumbnail Image
Name:
t11100424545FEMDAlazemi_24.pdf
Size:
713.06 KB
Format:
Adobe Portable Document Format
Description:
24 pages file
Loading...
Thumbnail Image
Name:
t11100424545FEMDAlazemi_SEC.pdf
Size:
5.61 MB
Format:
Adobe Portable Document Format
Description:
Full text secured file

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Plain Text
Description:

Collections