Publication: Chitin nanofiber from fungal source for fabrication of nanopaper and reinforcing element in pla-based composite
dc.contributor.affiliation | #PLACEHOLDER_PARENT_METADATA_VALUE# | en_US |
dc.contributor.author | Mizan Izzati Mat Zin | en_US |
dc.contributor.supervisor | Wan Mohd Fazli Wan Nawawi, Ph.D | en_US |
dc.contributor.supervisor | Dzun Noraini Jimat, Ph.D | en_US |
dc.date.accessioned | 2024-10-08T03:17:38Z | |
dc.date.available | 2024-10-08T03:17:38Z | |
dc.date.issued | 2022 | |
dc.description.abstract | Fungal chitin nanofiber from mushrooms is covalently associated with glucan which can contribute to higher mechanical properties compared to conventional animal-based chitin. However, recent studies had limited discovery on fungal chitin sources, which restricted the availability in some regions. Therefore, this study explored the possible fungal chitin sources from different species of mushrooms. Further in this study, the mechanical performance of chitin nanofiber from mycelium as chitin nanopaper and reinforcement element in PLA filament composites for 3D printing application were explored. The fungal chitin nanofiber was extracted using a mild extraction process and further fabricated into nanopaper using the solvent casting method. For PLA filament composites, the samples were prepared using a filament extruder and proceeded with 3D printed for mechanical performance tests. This study suggested that nanopaper from enoki was more crystalline than other samples. This translated to slightly higher modulus and tensile strength (Eenoki = 2.83 GPa, σenoki = 51 MPa). However, oyster nanopaper exhibited higher toughness (1.92 MJ/m3) and was selected for mycelium study. Chitin nanopaper from oyster mycelium had a superior tensile strength (σenoki = 93 MPa) and toughness (4.18 MJ/m3) compared to that of from oyster mushrooms. For the mechanical properties of 3D printed specimens from oyster chitin/PLA composites, the 7% chitin loading showed a threshold effect on the toughness (2.00 MJ/m3). The samples from 3% chitin mycelium/PLA had higher performance compared to that of 3% chitin oyster mushroom/PLA. Overall, this study suggested that fungal chitin nanofiber has the potential to be used as a reinforcement element in PLA for 3D filament. | en_US |
dc.description.abstractarabic | الكيتين الفطري نانوفيبر من عش الغراب يرتبط تساهميًا مع الجلوكان الذي يمكن أن يساهم في خصائص ميكانيكية أعلى مقارنة بالكيتين التقليدي القائم على الحيوانات. ومع ذلك، كانت الدراسات الحديثة اكتشاف محدود لمصادر الكيتين الفطرية، مما حد من توافره في بعض المناطق. لذلك، استكشفت هذه الدراسة مصادر الكيتين الفطرية المحتملة من أنواع مختلفة من الفطر. علاوة على ذلك في هذه الدراسة ، تم استكشاف الأداء الميكانيكي لألياف النانو الكيتين من الميسليوم مثل ورق الكيتين النانوي وعنصر تقوية في مركبات خيوط PLA لتطبيق الطباعة ثلاثية الأبعاد. تم استخلاص الألياف النانوية الفطرية من الكيتين باستخدام عملية استخلاص خفيفة وتم تصنيعها لاحقًا في ورق نانوي باستخدام طريقة الصب بالمذيب. بالنسبة لمركبات خيوط PLA، تم تحضير العينات باستخدام الطارد الخيطي والمضي قدمًا في الطباعة ثلاثية الأبعاد لاختبارات الأداء الميكانيكي. تشير هذه الدراسة إلى أن الورق النانوي من enoki أكثر بلورية من العينات الأخرى. هذا يترجم إلى معامل وقوة شد أعلى قليلاً (Eenoki = 2.83 GPa, σenoki = 51 MPa). ومع ذلك، فإن ورق المحار النانوي يظهر صلابة أعلى (1.92 MJ/m3) وتم اختياره لدراسة الفطريات. ورق الكيتين النانوي من فطر المحار يتمتع بقوة شد فائقة (σenoki = 93MPa) وصلابة (4.18 MJ/m3) مقارنة بتلك الموجودة في فطر المحار. بالنسبة للخصائص الميكانيكية للعينات المطبوعة ثلاثية الأبعاد من مركبات PLA / الكيتين، يُظهر تحميل الكيتين بنسبة 7 ٪ تأثيرًا حدًا على الصلابة (2.00 MJ/m3). كانت العينات المأخوذة من 3٪ من الكيتينmycelium / PLA ذات أداء أعلى مقارنة بأداء 3٪ من الكيتين oyster mushroom / PLA. بشكل عام ، تشبر هذه الدراسة أن ألياف الكيتين النانوية الفطرية لديها القدرة على استخدامها كعنصر تقوية في PLA للخيوط ثلاثية الأبعاد. | en_US |
dc.description.callnumber | t TP 248.65 C55 M685C 2022 | en_US |
dc.description.identifier | Thesis : Chitin nanofiber from fungal source for fabrication of nanopaper and reinforcing element in pla-based composite / by Mizan Izzati Binti Mat Zin | en_US |
dc.description.identity | t11100384437MizanIzzatiBintiMatZin | en_US |
dc.description.kulliyah | Kulliyyah of Engineering | en_US |
dc.description.nationality | Malaysian | en_US |
dc.description.notes | Thesis (MSENG)--International Islamic University Malaysia, 2021. | en_US |
dc.description.physicaldescription | xvi, 92 leaves : colour illustrations ; 30cm. | en_US |
dc.description.programme | Master of Science in Engineering | en_US |
dc.identifier.uri | https://studentrepo.iium.edu.my/handle/123456789/7075 | |
dc.language.iso | en | en_US |
dc.publisher | Kuala Lumpur : Kulliyyah of Engineering, International Islamic University Malaysia, 2022 | en_US |
dc.subject.lcsh | Chitin -- Biotechnology | en_US |
dc.subject.lcsh | Fungi -- Biotechnology | en_US |
dc.subject.lcsh | Three-dimensional printing | en_US |
dc.title | Chitin nanofiber from fungal source for fabrication of nanopaper and reinforcing element in pla-based composite | en_US |
dc.type | Master Thesis | en_US |
dspace.entity.type | Publication |
Files
Original bundle
1 - 2 of 2
Loading...
- Name:
- t11100436996MuthyaahBintiMohdJamil_24.pdf
- Size:
- 275.51 KB
- Format:
- Adobe Portable Document Format
- Description:
- 24 pages file
Loading...
- Name:
- t11100436996MuthyaahBintiMohdJamil_SEC.pdf
- Size:
- 1.73 MB
- Format:
- Adobe Portable Document Format
- Description:
- Full text secured file
License bundle
1 - 1 of 1